Payment & Shipping Terms:
|Body Material:||Forged Steel: Carbon Steel, Alloy Steel, Stainless Steel, Duplex Steel||Ball:||A105, SS304, SS316, F51, F53 Etc.|
|Size:||2in - 10in||Pressure Rating:||Class 2500LB / 2500#|
|Actuating Device:||Gear Operated||Connection Ends:||RF, RTJ|
|Seat:||Soft Seated, PTFE, NYLON, PEEK||OEM Service:||YES|
fire safe ball valve,
lockable ball valve
2500LB Forged Steel A105 Trunnion Ball Valve Soft Seated 3PC Split Body Flanged RTJ
Cut-away view of ball valve components:
3) Trunnion ball
4) Gear box
1. Product: Forged Steel A105 Trunnion Soft Seated Ball Valve RTJ
2. Size Range: 2” - 10"
3. Pressure Ratings: ANSI Class2500LB / 2500#
4. Body materials: Forged Steel A105 (N)
5. Trim: 13CR, 304SS, 316SS, Duplex stainless steel
6. Bore Type: Full Bore / FB
7. Actuator: Worm Gear
8. Fire Safe Design, Anti-Static, Nace Mr0175
Trunnion ball valves are mainly used in the industries of natural gas, oil products, chemicals, metallurgy, urban construction, environmental protection, foodstuff etc. Among them, the sulfur-resisting series products are applicable for seriously corrosive natural gas pipeline containing hydrogen sulphide mediums and impurities.
1. Distinctive Seating Structure
According to the extent of pressure, medium properties and sealing requirements, Trunnion ball valves may be made to front seal structure, back seal structure, or front-back dual seal structure.
2. Self-relieving Structure
In case of abnormal rise of pressure at middle cavity, ball valve of single seal structure is provided with self-relieving function, while ball valve of dual seal structure uses the auxiliary pressure relief device on valve body to carry out pressure relief.
3. First Aid of Seal
The valve is designed with an auxiliary seating emergency seal system, as shown in the figure. In case of soft seal damaged, or failure of seal in an emergency circumstances, emergency seal may be effected by injecting in sealant through auxiliary sealing system. If needed, emergency seal assembly can be used to rinse and lubricate the seating area.
Plus, valve stem can also be designed with an auxiliary emergency sealing system.
4. Fire Protection Strcture
If requested by working conditions and users, ball valve may be designed to fireproof. The fireproofing design of ball valve is to the standards of API607 and JB/T6899. In case of soft seal ring burnt in fire, the fire protection structure of ball valve functions to prevent mediums from mass leakage, thus to avoid fire spreading.
5. Antistatic Structure
When operating the valve, the friction between the ball and seat will produce electrostatic charge that can be accumulated on the ball. To prevent static spark, an antistatic device is placed on the valve to derive the electric charge accumulated on the ball.
6. Locking Device
To prevent misoperation and the unexpected open or close caused by the unpredicted circuit vibration, a locking device is designed at the fully opened and closed positions of hand operated ball valve. This design is proven especially good and effective in the production line of inflammable mediums of petroleum and chemicals, or when valves are mounted outdoors.
Design and manufacture: API6D
Inspection and Test: API 598,API 6D
End flange dimension: ASME B16.5
BW ends dimension: ASME B16.25
Face to face or End to ends: ASME B16.10
Pressure-temperature rating: ASME B16.34
2. Main Parts and Materials for the Forged Steel Trunnnion Soft Seated Ball Valve
|3||Drain Valve||ASTM A105|
|4||Bottom Cover||ASTM A105|
|8||Bottom Bush Bearing||PTFE+CS|
|9||Ball||ASTM A105+ENP / F304|
|10||Middle Flange Gasket||Soft Graphite+SS|
|12||Fire Safe Ring||Soft Graphite|
|19||Sealant Injection Valve||ASTM A105|
|20||Top Bush Bearing||PTFE+CS|
|22||Flat Bush Bearing||PTFE+CS|
|24||Connecting Ring||ANSI 1025|
|29||Back Seat||ASTM A105|
|30||Locating Pin||A182 F6a|
|33||Sealant Injection Valve||ASTM A105|
3. Main Connection Dimensions
Contact Person: Mr. Biff Teng