Payment & Shipping Terms:
|Body Material:||Cast Steel: Carbon Steel A216 WCB||Ball:||SS304, SS316|
|Size:||6IN, DN150||Pressure Rating:||Class 600LB / 600#|
|Actuating Device:||Worem Gear||Connection Ends:||RF, RTJ|
|Seat:||Soft Seated, PTFE, NYLON, PEEK||Port Type:||Full Port / FP|
fire safe ball valve,
lockable ball valve
API Cast WCB Trunnion Ball Valve 6inch 600LB Full Port 2PC Body Gear Operated Q347F
1. Product: 2PC Split Body Trunnion Ball Valve
2. Model: Q347F
3. Size Range: 6inch, DN150
4. Pressure Ratings: ANSI Class600
5. Body materials: Cast Steel, A216 WCB
6. Trim: 13CR, 304SS, 316SS
7. Bore Type: Full Bore / Full Port
8. Actuator: Manual, Worm Gear
9. Others: Fire Safe Design, Anti-Static, Nace Mr0175
Trunnion ball valves are mainly used in the industries of natural gas, oil products, chemicals, metallurgy, urban construction, environmental protection, foodstuff etc. Among them, the sulfur-resisting series products are applicable for seriously corrosive natural gas pipeline containing hydrogen sulphide mediums and impurities.
1. Distinctive Seating Structure
According to the extent of pressure, medium properties and sealing requirements, Trunnion ball valves may be made to front seal structure, back seal structure, or front-back dual seal structure.
2. Self-relieving Structure
In case of abnormal rise of pressure at middle cavity, ball valve of single seal structure is provided with self-relieving function, while ball valve of dual seal structure uses the auxiliary pressure relief device on valve body to carry out pressure relief.
3. First Aid of Seal
The valve is designed with an auxiliary seating emergency seal system, as shown in the figure. In case of soft seal damaged, or failure of seal in an emergency circumstances, emergency seal may be effected by injecting in sealant through auxiliary sealing system. If needed, emergency seal assembly can be used to rinse and lubricate the seating area.
Plus, valve stem can also be designed with an auxiliary emergency sealing system.
4. Fire Protection Strcture
If requested by working conditions and users, ball valve may be designed to fireproof. The fireproofing design of ball valve is to the standards of API607 and JB/T6899. In case of soft seal ring burnt in fire, the fire protection structure of ball valve functions to prevent mediums from mass leakage, thus to avoid fire spreading.
5. Antistatic Structure
When operating the valve, the friction between the ball and seat will produce electrostatic charge that can be accumulated on the ball. To prevent static spark, an antistatic device is placed on the valve to derive the electric charge accumulated on the ball.
6. Locking Device
To prevent misoperation and the unexpected open or close caused by the unpredicted circuit vibration, a locking device is designed at the fully opened and closed positions of hand operated ball valve. This design is proven especially good and effective in the production line of inflammable mediums of petroleum and chemicals, or when valves are mounted outdoors.
Design and manufacture: API6D
Inspection and Test: API 598,API 6D
End flange dimension: ASME B16.5
BW ends dimension: ASME B16.25
Face to face or End to ends: ASME B16.10
Pressure-temperature rating: ASME B16.34
Visual Inspection according to : MSS SP-55
Marking according to : MSS SP-25
2. Main Parts and Materials for the Trunnnion Soft Seated Ball Valve
|No.||Parts Name||Carbon Steel Series|
|1||Ball||A105+HCr/ENP, F304, F316|
|2||Bush Bearing||Metal +PTFE, Braided Graphite Fibre|
|3||Sealing Ring||PTFE / RPTFE / NYLON / MOLON / DELRIN or PEEK|
|4||Seat||A105+HCr/ ENP / SS304 / SS316|
|6||Fire Safe Gasket||Soft Graphite+ SS|
|10||Sealant Injection Valve||The sane material with Body|
|11||Gasket||Soft Graphite+ SS|
|19||Ball||A182 F304 / F316|
|21||Gasket||Soft Graphite+ SS|
|23||Sealant Injection Valve||The same material with Body|
|25||Bush Bearing||Metai+PTFE, Braided Graphite Fibre|
|26||Drainage Valves||The same material with Body|
|29||Stem||A182 F6a / F304 / F316|
|30||Thrust bearing||Metal+PTFE, Braided Graphite Fibre|
|32||Gasket||Soft Graphite+ SS|
|35||Packing||Soft Graphite / PTFE|
|36||Packing Gland||A182 F6|
|37||Gland Flange||A216 WCB|
|42||Operation Type||Worm Gear|
Contact Person: Mr. Biff Teng