Payment & Shipping Terms:
|Body Material:||Carbon Steel, Stainless Steel||Trim:||Trim 1, Trim 5, Trim 8, 13Cr, Half Stellite/ Full Stellite|
|Size:||Dn50 - Dn600||Pressure Rating:||Pn 25|
|Actuator:||Handwheel, Gear Operated Or Bare Stem||Connection Ends:||RF, RTJ, BW, Butt Welding|
|Applicant Medium:||W.O.G||Name:||Manual Gate Valve|
industrial gate valve,
pressure seal gate valve
Wedge Gate Valve Cast Steel Din Pn25 Bolted Cover Metal Seal Manual Sluice Valves
Gate valves are actuated by a threaded stem which connects the actuator (e.g. handwheel or motor) to the gate. They are characterised as having either a rising or a nonrising stem, depending on which end of the stem is threaded. Rising stems are fixed to the gate and rise and lower together as the valve is operated, providing a visual indication of valve position. The actuator takes the form of a nut which is rotated around the threaded stem to move it. Nonrising stem valves are fixed to, and rotate with, the actuator, and are threaded into the gate. They may have a pointer threaded onto the upper end of the stem to indicate valve position, since the gate's motion is concealed inside the valve. Nonrising stems are used underground or where vertical space is limited.
1. Type: Din Pn25 Gate Valves
2. OS&Y, Bolted Bonnet, Solid or Flexible Wedge Design
3. Size Range: Dn50 to Dn600
4. Pressure Ratings: Pn25
5. Materials Available in: Cast Steel GS-C25, 1.4308, 1.4408, WCB, LCB, CF8, CF8M, CF3, CF3M, WC6, WC9, C5, C12 or Equivalent;
6. Various trim materials are available to suit different service conditions
7. Actuator: Manual, Handwheel
8. NACE MR 0175 on request
|Face to Face||DIN3202|
|Test & Inspection||DIN3230|
1. Bonnet Gasket Style
Stainless steel + flexible graphite combined gasket;
Stainless steel + flexible graphite wounded gasket;
Ring joint gasket;
2. Packing Seal
Flexible graphite is used for packing material. PTFE or combined packing material can be also used.
3. Body and Bonnet Connection
Bolted Bonnet design. (B.B)
For carbon steel gate valve, the seat is usually forged steel. The seat sealing surface is overlaying welded with hard alloy specified by the customer. For Stainless steel gate valve, the seat is integral with body, or it can be machined directly after hard alloy welded. Threaded or welded type seat is also optional for stainless steel gate valve.
5. Disc Design
NPS≥2 Gate valves are flexible wedge gate, NPS<2 Gate valves are solid wedge gate.
6. Backseat Design
All gate valves have backseat design.
7. Stem Design
The stem is integral forged design.
8. Stem Nut
Usually, the stem nut is made of ASTM A439 D2. It is also can be made of copper alloy or other materials if being requested by the customer.
Hand wheel or bevel gear box is usually used for gate valve operation, electric actuator also can be used for gate valve operation if being requested by the customers.
1. Cast Steel Gate Valve Parts and Material List:
|CS/Trim 1||CS/Trim 8||CS/Trim 5||Stainless Steel|
|1||Body||DIN 17245 GS-C25+CR 13||DIN 17245 GS-C25+STL||DIN 17245 GS-C25+STL||DIN 17445 1.4308||DIN 17445 1.4408|
|2||Wedge||DIN 17245 GS-C25+CR 13||DIN 17245 GS-C25+CR 13||DIN 17245 GS-C25+STL||DIN 17445 1.4308||DIN 17445 1.4408|
|3||Stem||ASTM A182 F6a||ASTM A182 F304||ASTM A182 F316|
|4||Nut||A194 2H||A194 8||A194 8|
|5||Bolt||A193 B7||A193 B8||A193 B8|
|6||Gasket||SS Spiral Wound W/graphite, or SS Spiral Wound W/ PTFE, or Reinforced PTFE|
|7||Bonnet||DIN 17245 GS-C25+CR 13||DIN 17245 GS-C25+CR 13||DIN 17245 GS-C25+CR 13||DIN 17445 1.4308||DIN 17445 1.4408|
|8||Packing||Braided Graphite or Reformed Graphite Ring or PTFE|
|9||Gland||ASTM A182 F6a||ASTM A182 F304||ASTM A182 F316|
|10||Gland Flange||DIN 17245 GS-C25||DIN 17445 1.4308||DIN 17445 1.4408|
|11||Stem Nut||Copper Alloy or A439 D2|
|12||Hand Wheel||Ductile Iron or Carbon Steel|
2. Main Connection Dimensions:
3. Hydro Test Specifications:
|Nominal Pressure (MPa)||Shell Test (MPa)||Sealing Test(MPa)||Suitable Medium|
|1.6||2.4||1.76||Water, Oil & Gas|
Contact Person: Mr. Biff Teng