Payment & Shipping Terms:
|Body Material:||Carbon Steel GS-C25, WCB||Trim:||Trim 1#, Trim 5#, Trim 8#|
|Actuator:||Handwheel Operated||Connection Ends:||RF|
|Body Type:||Straight||Other:||OEM Available|
stainless steel globe valve,
manual globe valve
Industrial Cast Carbon Steel Globe Valve GS-C25 Dn200 Pn40 Rising Stem Flanged J41H
1. Type: GS-C25 Industrial Globe Valve
2. OS&Y Construction, Bolted Bonnet
3. Size of Globe Valve: Dn200
4. Pressure Ratings: Pn40
5. End Connections: Flanged (RF)
6. Materials Available in: GS-C25, WCB
7. Various trim materials are available to suit service conditions
8. Actuator: Manual, Handwheel
|Face to Face||DIN3202|
|Test & Inspection||DIN3230|
Hydro Test Specifications:
|Nominal Pressure (MPa)||Shell Test (MPa)||Sealing Test(MPa)||Suitable Medium|
|1.6||2.4||1.76||Water, Oil & Gas|
Bolted Bonnet: Outside Screw and Yoke;
Metallic seating surfaces
2. Body and Bonnet Connection
Pressure seal bonnet design.
3. Bonnet Gasket Style
Stainless steel + flexible graphite wounded gasket;
4. Packing Seal
As usual, flexible graphite is used for packing material. PTFE or combined packing material can be also used if being requested by the customer.
5. Stem Design
The stem is of integral forged design. The minimum diameter of the stem shall per the standard requirement.
6. Backseat Design
All globe valves have the backseat design. In most cases, the carbon steel globe valve is fitted with a renewable backseat. For stainless steel globe valve, the backseat is machined directly in the bonnet or is machined after welding. When the globe valve is at fully open position, the sealing of the backseat can be very reliable.
For carbon steel globe valve, the seat is usually forged steel. The sealing surface of the seat is spray welded with hard alloy specified by the customer. For Stainless steel globe valve, integral seat is usually adopted, or to weld hard alloy directly integrally. Threaded or welded on seat is also optional for stainless steel globe valve if being requested by the customer.
8. Stem Nut
Usually, the stem nut is made of ASTM A439 D2. it is also can be made of copper ally if being requested by the customer.
In most of cases, handwheel & gearbox is usually used for globe valve operatrion. Chain wheel and electric actuator can be also used for globe valve operation if being requested by the customers.
11. Other Globe Valves
Besides the common globe valves, we also makes cryogenic globe valve, Bellow sealed globe valve, Jacketed globe valve, etc.
1. Din Industrial Globe Valve Parts and Material List:
|CS/Trim 1||CS/Trim 8||CS/Trim 5|
|1||Body||DIN 17245 GS-C25+CR13 (WCB+13CR)||DIN 17245 GS-C25+STL (WCB+STL)||DIN 17245 GS-C25+STL (WCB+STL)|
|2||Disc||DIN 17245 GS-C25+CR13 (WCB+13CR)||DIN 17245 GS-C25+CR13 (WCB+13CR)||DIN 17245 GS-C25+STL (WCB+STL)|
|3||Stem||ASTM A182 F6a|
|6||Gasket||SS Spiral Wound W/graphite, or SS Spiral Wound W/ PTFE, or Reinforced PTFE|
|7||Bonnet||DIN 17245 GS-C25 (A216-WCB)||DIN 17245 GS-C25 (A216-WCB)||DIN 17245 GS-C25 (A216-WCB)|
|8||Packing||Braided Graphite or Reformed Graphite Ring or PTFE|
|9||Gland||ASTM A182 F6a|
|10||Gland Flange||DIN 17245 GS-C25 (A216-WCB)|
|11||Stem Nut||Copper Alloy or A439 D2|
|12||Hand Wheel||Ductile Iron or Carbon Steel|
2. Main Connection Dimensions Din Pn40:
|PN 4.0 MPa (PN40 BAR)|
Contact Person: Mr. Biff Teng