Product Details:
Payment & Shipping Terms:
|
| Body Material: | Special Material: Alloy 20, A182 - F20, B462 - UNS N08020 | Trim: | Alloy 20 |
|---|---|---|---|
| Size: | 1/2in - 2in | Pressure Rating: | Class 800LB / 800# |
| Actuator: | Automatically | Connection Ends: | SW (Socket Weld), Npt ,Screwed, Threaded |
| Disc Type: | Lift Type | Other: | OEM Available |
| Highlight: | forged steel gate valve,forged steel check valve |
||
| Body material | Alloy 20 — ASTM B462 UNS N08020 / A182 F20 |
|---|---|
| End connection | SW socket weld to ASME B16.11; NPT threaded to ASME B1.20.1 |
| Valve type | Forged lift check valve, metal seat |
| Pressure class | ASME Class 800 |
| Size range | 1/2"–2" |
| Construction | OS&Y; bolted bonnet / welded bonnet |
| Bore type | Full bore / reduced bore |
| Seat | Metallic seating surfaces; integral or hard-alloy overlay |
| Gasket | Stainless steel + flexible graphite wound; metal gasket; metal ring gasket |
| Design standard | BS 5352 |
| Inspection & test | API 598 |
| Special | NACE MR0175 on request |
This Alloy 20 forged lift check valve is supplied in ASTM B462 UNS N08020 / A182 F20 and covers ASME Class 800 in 1/2" to 2". The body and bonnet are forged, with a choice of bolted or welded bonnet, and full bore or reduced bore are both available. The lift disc opens vertically off the seat under forward flow and closes by gravity and back-pressure when flow stops or reverses, so the valve responds quickly and is suited to small-bore high-pressure piping and vertical upward-flow lines. Seating is metallic — integral with the body, or machined after hard-alloy weld overlay. The cover gasket is stainless steel + flexible graphite wound, with metal gasket and metal ring gasket available. End connections are SW socket weld to ASME B16.11 and NPT threaded to ASME B1.20.1. Design is to BS 5352, inspection and test to API 598, and NACE MR0175 can be supplied on request. Alloy 20 is selected for sulphuric acid, phosphoric acid and chloride-bearing chemical process service where 316 stainless would suffer pitting or stress corrosion cracking.
This Alloy 20 lift check valve is used for non-return protection in chemical process piping, sulphuric acid and phosphoric acid service, pickling lines, heat exchangers, and other small-bore Class 800 services where a corrosion-resistant forged check valve is required. Alloy 20 (UNS N08020) combines nickel, chromium, molybdenum and copper, giving resistance to sulphuric acid, chlorides and a wide range of chemical media that would attack 316 stainless. The lift disc design is suited to vertical upward-flow lines and to installations where a short stroke and quick response are preferred over the lower pressure drop of a swing check. The SW socket weld end is used for permanent welded joints, and the NPT threaded end where the valve must be removable without cutting the pipe. For sour service, NACE MR0175 can be specified.
Design and manufacture: BS 5352.
SW socket weld dimension: ASME B16.11.
NPT screw thread dimension: ASME B1.20.1.
Butt-welding dimension: ASME B16.25.
Flange end dimension: ASME B16.5.
Inspection and test: API 598.
Material: ASTM / ASME B462 UNS N08020, A182 F20.
Special: NACE MR0175 / ISO 15156 on request.
1. Construction: OS&Y; bolted bonnet / welded bonnet
2. Bore type: Full bore / reduced bore
3. Size range: 1/2"–2"
4. Pressure rating: ASME Class 800
5. End connection: SW socket weld to ASME B16.11; NPT threaded to ASME B1.20.1
6. Body material: Alloy 20 — ASTM B462 UNS N08020 / A182 F20
7. Disc type: Lift; swing and ball available
8. Trim: Various trim materials to suit service conditions
9. Special: NACE MR0175 on request
10. Seat: Metallic seating surfaces — integral or hard-alloy weld overlay
Alloy 20 vs 316 stainless / F51 duplex: Alloy 20 (UNS N08020) is a nickel-iron-chromium alloy with molybdenum and copper; the copper addition gives it resistance to sulphuric acid that 316 stainless does not have, and the nickel content gives resistance to chloride stress corrosion cracking that duplex F51 cannot match. 316 / 316L is the economical stainless choice for general corrosive service where sulphuric acid and chlorides are not present in aggressive concentrations. F51 duplex is selected where higher strength and chloride pitting resistance are needed, but it is not suitable for hot concentrated sulphuric acid. Select Alloy 20 where the medium is sulphuric or phosphoric acid, or where a mixed chemical stream would attack 316 or duplex.
Lift vs swing vs ball check: A lift check valve uses a disc that lifts vertically off the seat and closes by gravity and back-pressure; the stroke is short, the response is quick, and the valve is compact, which suits small-bore high-pressure and vertical upward-flow lines. A swing check uses a hinged disc that swings out of the flow path and offers a larger opening and lower pressure drop at larger sizes, and is more common on horizontal lines. A ball check uses a ball on a seat and is chosen for slurry or dirty service where a hinged disc could foul. This page is the lift type; swing and ball types are available in the same forged check valve family.
SW vs NPT vs BW vs flanged: SW socket weld is the standard end connection on this page and is common on small-bore high-pressure piping because the pipe is inserted into a socket and fillet-welded, which is easy to align. NPT threaded ends to ASME B1.20.1 are used where the valve must be removable without welding; butt weld (BW) to ASME B16.25 is used where a smooth bore and radiographic weld quality are required; flanged ends to ASME B16.5 are used where the valve must be bolted into a flanged line. This page covers SW and NPT; specify the end connection and pipe schedule in the inquiry.
1. Pressure-Temperature Ratings for Carbon Steel (at 100°F)
ASME Class 150 — 285 psi; Class 300 — 740 psi; Class 600 — 1480 psi; Class 800 — 1975 psi; Class 1500 — 3705 psi.
2. Disc Type of Check Valve
Swing type, lifting type and ball type check valve.
3. Body and Bonnet Connection
Bolted bonnet; welded bonnet.
4. Cover Gasket Style
Stainless steel + flexible graphite wound gasket; metal gasket; metal ring gasket.
5. Seat
Metallic seating surfaces. For Alloy 20 check valves, an integral seat is usually adopted, or it can be machined integrally after hard-alloy weld overlay.
6. Bore Type
Full bore (FB) and reduced bore (RB).
Swipe horizontally to see all materials
| No. | Part Name | A105 / F6a | A105 / F6aHFS | LF2 / 304 | F11 / F6aHF | F304(L) / 304(L) | F316(L) / 316(L) | F51 / F51 | F20 / F20 |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Body | A105 | A105 | LF2 | F11 | F304(L) | F316(L) | F51 | F20 |
| 2 | Seat ring | 410 | 410HF | 304 | 410HF | 304(L) | 316(L) | F51 | F20 |
| 3 | Disc | F6a | F6a | F304 | F6aHF | F304(L) | F316(L) | F51 | F20 |
| 5 | Gasket | 304 + flexible graphite | 316 + flexible graphite | ||||||
| 6 | Bonnet | A105 | A105 | LF2 | F11 | F304(L) | F316(L) | F51 | F20 |
| 7 | Bolt | B7 | B7 | L7 | B16 | B8 / B8M | B8 / B8M | B8M | B8M |
| 15 | Nameplate | AL | AL | AL | AL | AL | AL | AL | AL |
| 32 | Rivet | AL | AL | AL | AL | AL | AL | AL | AL |
| 33 | Steel ball | 430 | 430 | 304 | STL | F316(L) | 316(L) | STL | STL |
| 34 | Disc nut | 2H | 2H | 8 | 8 | 8 / 8M | B8 / B8M | 8M | 8M |
| 35 | Rocking arm | 410 | 410 | 304 | 410 | 316(L) | 316(L) | F51 | F20 |
| 36 | Pin | 410 | 410 | 304 | 410 | 304(L) | 316(L) | F51 | F20 |
Column headers give the body / trim material combination for each option.
Swipe horizontally to see all dimensions
| Parameter | Type | 1/4" | 3/8" | 1/2" | 3/4" | 1" | 1 1/4" | 1 1/2" | 2" |
|---|---|---|---|---|---|---|---|---|---|
| Face-to-face L, mm | Lift | 79 | 79 | 92 | 111 | 120 | 152 | 172 | 220 |
| Swing | 79 | 79 | 92 | 111 | 120 | 120 | 140 | 178 | |
| Height H, mm | Lift | 61 | 61 | 61 | 78 | 84 | 84 | 118 | 132 |
| Swing | 61 | 61 | 61 | 78 | 84 | 84 | 120 | 133 | |
| Flow port dimension d, mm | Lift | 7 | 9 | 13 | 17.5 | 23 | 30 | 35 | 46 |
| Swing | 8 | 10.5 | 13.5 | 18 | 24 | 29 | 36.5 | 45 | |
| Weight, kg | Lift | 1.2 | 1.5 | 1.7 | 3.3 | 4.2 | 4.2 | 10.5 | 12.5 |
| Swing | 1.4 | 1.5 | 1.7 | 3.3 | 4.2 | 4.2 | 8.5 | 10.9 |
What is Alloy 20, and why is it used for this lift check valve?
Alloy 20 (UNS N08020, covered by ASTM B462 for forged fittings and A182 F20 for forged flanges and valve bodies) is a nickel-iron-chromium alloy with additions of molybdenum and copper. The copper addition gives it excellent resistance to sulphuric acid, and the molybdenum and chromium give resistance to chlorides, phosphoric acid and a wide range of chemical process media. It is used where 316 stainless would suffer pitting or stress corrosion cracking — sulphuric acid service, chemical process piping, pickling lines, and heat exchangers. This page is the Alloy 20 version of the forged lift check valve; the same valve body is also available in A105 carbon steel, LF2, F11, F304(L), F316(L) and F51.
What is a lift check valve, and when is it used instead of a swing check valve?
A lift check valve uses a disc that lifts vertically off the seat when flow passes and drops back onto the seat when flow stops or reverses, so it closes by gravity and back-pressure rather than by a hinge. It is compact, has a short stroke and responds quickly to reverse flow, which makes it suitable for small-bore high-pressure piping, vertical lines with upward flow, and services where a compact installation is needed. A swing check valve uses a hinged disc that swings out of the flow path, giving a larger opening and lower pressure drop at larger sizes; it is more common on horizontal lines and larger sizes. A ball check valve uses a ball on a seat and is chosen for slurry or dirty service where a hinged disc could foul.
What is the difference between SW and NPT ends on this Alloy 20 check valve?
SW stands for socket weld: the pipe is inserted into a recessed socket in the valve end and fillet-welded, following ASME B16.11. NPT stands for National Pipe Thread Taper: the valve end is threaded and the pipe is screwed in with thread sealant, following ASME B1.20.1. SW gives a welded, leak-tight joint that cannot be dismantled, and is preferred on high-pressure, high-temperature and cyclic service; NPT allows the valve to be removed without cutting the pipe, and is used where maintenance access or temporary installation is needed, but the threaded joint is more prone to leakage under thermal cycling and vibration. This page offers both ends on the same Alloy 20 body, Class 800 and 1/2–2 inch size range.
What does ASME Class 800 mean, and what pressure can it handle?
ASME Class 800 is a forged valve pressure class widely used on small-bore high-pressure piping. It is not a flange class — it is a forged body rating, so the valve ends are normally SW, threaded or BW rather than flanged. For carbon steel at 100°F the rating is 1975 psi; the same page features table also lists Class 150 at 285 psi, Class 300 at 740 psi, Class 600 at 1480 psi and Class 1500 at 3705 psi, all at 100°F. The actual allowable pressure falls as temperature rises, so the rating must be read from the pressure-temperature table of the applicable standard rather than from the class number alone.
Is this Alloy 20 lift check valve available with NACE MR0175?
Yes. NACE MR0175 is listed as a special requirement on this page, which means the valve can be supplied with materials and hardness controlled to NACE MR0175 / ISO 15156 for sour service when specified. Because NACE compliance affects material selection, bolting and hardness verification, it must be stated in the inquiry together with the H2S partial pressure, chloride level and temperature. Do not assume NACE compliance unless it is explicitly requested and confirmed on the order.
Contact Person: Mr. Biff Teng
Tel: 86-18066318081