Product Details:
Payment & Shipping Terms:
|
| Body Material: | Forged Carbon Steel, Stainless Steel, Duplex Stainless Steel | Trim: | 13Cr, Half Stellite / Full Stellite, SS304, SS316, DSS |
|---|---|---|---|
| Size: | 0.5in - 2in | Pressure Rating: | Class 900LB, 900# |
| Actuator: | Automatically | Connection Ends: | Flanged RF, RTJ |
| Disc Type: | Swing Type | Other: | OEM Available |
| Model | H44 (forged swing check valve, flanged, bolted bonnet) |
|---|---|
| Pressure class | ASME Class 900; series covers 150 / 300 / 600 / 800 / 900 / 1500 / 2500 |
| Size | 1/2" (DN15); 1/2"–2" series available |
| Bore type | Full port (FP); reduced port on request |
| Design standard | BS 5352 / API 602 |
| Body material | ASTM A105N (normalized); LF2, F11, F304/F304L, F316/F316L, F51 also available; F5, F22 on request |
| Seat type | Metallic seating; hardfaced (HF) option |
| Bonnet type | Bolted bonnet |
| Cover gasket | 304 / 316 + flexible graphite spiral wound |
| Disc type | Swing disc |
| End connections | Flanged ASME B16.5 (RF / RJ); SW/NPT/BW on request |
| Inspection & test | API 598 |
| Special options | NACE MR0175 on request |
This Class 900LB forged steel flanged swing check valve is the 1/2" (DN15) full-port bolted bonnet design to BS 5352 / API 602, with a swing disc and metallic seating surfaces. The body is forged ASTM A105N normalized carbon steel; A350 LF2, A182 F11, A182 F304/F304L, A182 F316/F316L and A182 F51 are also available, with F5 and F22 on request. Flanged ends are to ASME B16.5 with raised face (RF) or ring joint (RJ) facing; socket weld, NPT and butt-weld ends are available on request. The valve is API 598 tested and is specified for small-bore high-pressure water, oil, gas and utility service lines.
This 1/2" Class 900 forged steel check valve is specified on small-bore high-pressure lines in oil and gas production and gathering, refinery and petrochemical process lines, power plant and utility systems, and general industrial service where a 1/2" flanged forged steel check valve is required. The A105N normalized body gives good strength and low-temperature toughness; full port gives the lowest pressure drop; the bolted bonnet allows inline inspection of the disc and seat. For low-temperature service, A350 LF2 is available; for corrosive service, F304/F316; for chloride-rich or sour service, F51 and NACE MR0175 compliance are available on request.
Design and manufacture: Forged steel check valve according to BS 5352 and API 602.
Pressure-temperature ratings: ASME B16.34 (and API 602 for Class 800).
Flange end dimension: ASME B16.5.
Socket weld end (on request): ASME B16.11.
Screw thread end (on request): ASME B1.20.1 (NPT).
Butt-weld end (on request): ASME B16.25.
Material: ASTM A105N; A350 LF2, A182 F11, A182 F304/F304L, A182 F316/F316L, A182 F51; F5/F22 on request.
Inspection and test: API 598.
Sour service: NACE MR0175 / ISO 15156 on request.
1. Type: Forged steel flanged swing check valve, full port
2. Design: Bolted bonnet, swing disc
3. Size: 1/2" (DN15); 1/2"–2" series available
4. Pressure Rating: ASME Class 900; series covers 150 / 300 / 600 / 800 / 900 / 1500 / 2500
5. End Connections: Flanged ASME B16.5 (RF / RJ); SW / NPT / BW on request
6. Body Material: ASTM A105N; LF2, F11, F304/F304L, F316/F316L, F51 also available; F5/F22 on request
7. Metallic seat with HF hardfaced option; various trim materials available
8. NACE MR0175 on request
9. Test and inspection: API 598
A105N vs A105: ASTM A105 is forged carbon steel in the as-forged or stress-relieved condition. ASTM A105N is the same chemistry but normalized after forging, which refines the grain structure and improves low-temperature toughness. A105N is preferred where the valve will see low ambient or low process temperatures, or where a normalized heat treatment is required by the line specification. This page is supplied in A105N as standard; A105 is available where normalization is not required.
Forged vs cast at 1/2" Class 900: small-bore check valves in Class 900 are normally forged because the wall thickness and body shape at 1/2 inch are difficult to cast soundly, and forging gives a denser, more homogeneous section for high-pressure small-bore service. BS 5352 and API 602 are the design standards for forged steel check valves, while BS 1868 covers cast steel check valves. The forged body also machines more predictably for the flanged end preparation.
Full port vs reduced port: full port (FP) means the flow port matches the nominal pipe bore, giving the lowest pressure drop across the valve. It is preferred on small-bore lines where pressure drop matters, and where a pig or instrument has to pass through the valve. Reduced port (RP) has a smaller flow port, which increases flow velocity through the seat and gives a more positive disc lift and faster closing, at the cost of a higher pressure drop. This page is the full-port version; reduced port is available on request.
1. General
Bolted bonnet;
Swing disc;
Full port;
Metallic seating surfaces.
2. Pressure-Temperature Ratings
Ratings to ASME B16.34 (and API 602 for Class 800). For ASTM A105N carbon steel at 100°F (38°C): Class 150 285 psi; Class 300 740 psi; Class 600 1480 psi; Class 800 (API 602) 1975 psi; Class 900 2220 psi; Class 1500 3705 psi; Class 2500 6170 psi. Stainless and chrome-moly ratings differ; refer to ASME B16.34 for the derating curve at elevated temperature.
3. Body and Bonnet Connection
Bolted bonnet is standard; welded bonnet and pressure seal bonnet are available on request.
4. Cover Gasket Style
Stainless steel + flexible graphite wound gasket;
Metal gasket and metal ring gasket are optional.
5. Seat
Metallic seat; for carbon steel check valve, the seat is usually forged steel and the sealing surface may be spray-welded with hard alloy (HF). For stainless steel check valve, an integral seat is usually adopted, or it can be machined integrally after hard alloy welding.
6. Bore Type
Full port (FP); reduced port on request.
Swipe horizontally to see all materials
| No. | Part Name | A105N / F6a | A105N / F6a HF | LF2 / 304 | F11 / F6a HF | F304(L) / 304(L) | F316(L) / 316(L) | F51 / F51 |
|---|---|---|---|---|---|---|---|---|
| 1 | Body | ASTM A105N | ASTM A105N | ASTM A350 LF2 | ASTM A182 F11 | ASTM A182 F304(L) | ASTM A182 F316(L) | ASTM A182 F51 |
| 2 | Gasket | 304 + Flexible graphite | 316 + Flexible graphite | |||||
| 3 | Disc | ASTM A182 F6a | F6a + HF | ASTM A182 F304 | F6a + HF | ASTM A182 F304(L) | ASTM A182 F316(L) | ASTM A182 F51 |
| 4 | Bonnet | ASTM A105N | ASTM A105N | ASTM A350 LF2 | ASTM A182 F11 | ASTM A182 F304(L) | ASTM A182 F316(L) | ASTM A182 F51 |
| 5 | Bolt | ASTM A193 B7 | ASTM A193 B7 | ASTM A193 L7 | ASTM A193 B16 | ASTM A193 B8 | ASTM A193 B8M | ASTM A193 B8M |
Swipe horizontally to see all dimensions
| NPS | L (RJ) / L1 (BW) | H (mm) | d Lift (mm) | d Swing (mm) | Weight Lift (kg) | Weight Swing (kg) |
|---|---|---|---|---|---|---|
| 1/2 | 216 | 81 | 12 | 13.5 | 5.2 | 5.0 |
| 3/4 | 229 | 93 | 15 | 18 | 6.8 | 6.1 |
| 1 | 254 | 95 | 20 | 24 | 10.5 | 10.8 |
| 1 1/4 | 280 | 101 | 28 | 29 | 12.8 * | 12.9 * |
| 1 1/2 | 305 | 118 | 32 | 36.5 | 18.0 | 17.6 |
| 2 | 371 | 130 | 40 | 45 | 24.0 | 27.0 |
Dimensions in mm. * 1 1/4" weight to be confirmed.
What is the difference between ASTM A105 and A105N on this 1/2 inch Class 900 check valve?
ASTM A105 is forged carbon steel in the as-forged or stress-relieved condition. ASTM A105N is the same chemistry but normalized after forging, which refines the grain structure and improves low-temperature toughness. A105N is preferred where the valve will see low ambient or low process temperatures, or where a normalized heat treatment is required by the line specification. This page is supplied in A105N as standard; A105 is available where normalization is not required.
Why is this 1/2 inch Class 900 check valve forged rather than cast?
Small-bore check valves in Class 900 are normally forged because the wall thickness and body shape at 1/2 inch are difficult to cast soundly, and forging gives a denser, more homogeneous section for high-pressure small-bore service. BS 5352 and API 602 are the design standards for forged steel check valves, while BS 1868 covers cast steel check valves. The forged body also machines more predictably for the flanged end preparation.
What is the difference between full port and reduced port on this 1/2 inch check valve?
Full port (FP) means the flow port matches the nominal pipe bore, giving the lowest pressure drop across the valve. It is preferred on small-bore lines where pressure drop matters, and where a pig or instrument has to pass through the valve. Reduced port (RP) has a smaller flow port, which increases flow velocity through the seat and gives a more positive disc lift and faster closing, at the cost of a higher pressure drop. This page is the full-port version; reduced port is available on request.
Is NACE MR0175 available on this A105N forged swing check valve?
Yes, NACE MR0175 / ISO 15156 compliance is available on request. For sour service at Class 900, the A105N body must meet the NACE hardness limit, and the trim and bolting hardness must also comply. F316/F316L and F51 are the usual body alternatives for sour service where carbon steel is not suitable. The H2S partial pressure, operating temperature, CO2 content and chloride concentration from your line conditions are needed to confirm the correct material and hardness specification before production.
Contact Person: Mr. Biff Teng
Tel: 86-18066318081