Product Details:
Payment & Shipping Terms:
|
| Body Material: | Cast Steel: Carbon Steel, Alloy Steel, Stainless Steel, Duplex Steel | Ball: | A105, SS304, SS316, F51, F53 Etc. |
|---|---|---|---|
| Size: | 2in - 20in | Pressure Rating: | Class 900LB / 900# |
| Actuating Device: | Wrench, Gear Operated | Connection Ends: | RF, RTJ, BW |
| Seat: | Soft Seated, PTFE, NYLON, PEEK | OEM Service: | YES |
| Highlight: | manual ball valve,lockable ball valve |
||
| Model | Q47F trunnion ball valve, reduced bore, soft seat |
|---|---|
| Pressure class | ASME Class 900 / 900LB / 900# |
| Size range | 2"–20" reduced bore (3*2, 4*3, 6*4, 8*6, 10*8, 12*10, 14*12, 16*14, 18*16, 20*18) |
| Body materials | ASTM A216 WCB; A352 LCB / LCC; A351 CF8 / CF8M / CF3 / CF3M |
| Trim options | 13Cr, 304SS, 316SS, duplex stainless steel |
| Seat type | Soft seat: PTFE / RPTFE / NYLON / MOLON / DELRIN / PEEK |
| Bore type | Reduced bore (RB) |
| Body style | Side-entry split body, trunnion mounted |
| Design standard | API 6D / ASME B16.34 |
| Face-to-face / end-to-end | ASME B16.10 |
| End connections | RF / RTJ flanged (ASME B16.5); BW (ASME B16.25) |
| Fire safety / anti-static | Fire-safe to API 607; anti-static design |
| Actuator | Lever or worm gear; electric / pneumatic on request |
| Inspection & test | API 598 / API 6D |
| Sour service | NACE MR0175 on request |
This Class 900LB cast steel trunnion soft-seated ball valve is the Q47F reduced bore design, covering 2" to 20" shown as 3*2 to 20*18. A reduced bore (RB) valve has a bore smaller than the pipe internal diameter, giving a more compact and economical valve at the cost of a higher pressure drop. The ball is trunnion-mounted on top and bottom bearings, so the ball stays fixed and the seat rings are pushed against it by line pressure and spring force. The body is ASTM A216 WCB cast carbon steel; A352 LCB/LCC for low-temperature service and A351 CF8 / CF8M / CF3 / CF3M stainless steel are also available. Soft seat materials include PTFE, RPTFE, NYLON, MOLON, DELRIN and PEEK; trim options are 13Cr, 304SS, 316SS and duplex stainless steel. The valve has RF / RTJ flanged ends to ASME B16.5 or BW ends to ASME B16.25, is fire-safe to API 607, anti-static, and available with NACE MR0175 compliance on request.
This Class 900 Q47F reduced bore trunnion ball valve is specified on natural gas, oil products, chemicals, metallurgy, urban construction, environmental protection and foodstuff service, where a quarter-turn valve with low operating torque and bubble-tight shutoff is required at high pressure. The reduced bore design is selected where the pressure drop is acceptable and space or cost is a constraint; for pigging or the lowest pressure drop, a full bore valve should be specified. The WCB body suits general oil and gas service; LCB for low-temperature service; CF8 / CF8M for corrosive service. The anti-sulphur series is used on natural gas pipelines containing hydrogen sulphide and impurities.
Design and manufacture: API 6D and ASME B16.34.
Inspection and test: API 598 and API 6D.
End flange dimension: ASME B16.5.
BW end dimension: ASME B16.25.
Face-to-face and end-to-end: ASME B16.10.
Pressure-temperature rating: ASME B16.34.
Fire safety: API 607 and JB/T 6899.
Sour service: NACE MR0175 on request.
1. Product: Cast steel trunnion soft-seated ball valve, reduced bore
2. Model: Q47F
3. Size Range: 2"–20" reduced bore (3*2–20*18)
4. Pressure Rating: ASME Class 900 / 900#
5. Body Materials: ASTM A216 WCB; A352 LCB / LCC; A351 CF8 / CF8M / CF3 / CF3M
6. Trim: 13Cr, 304SS, 316SS, duplex stainless steel
7. Seat: Soft seat — PTFE / RPTFE / NYLON / MOLON / DELRIN / PEEK
8. Bore Type: Reduced bore (RB)
9. Actuator: Lever or worm gear; electric / pneumatic on request
10. Safety / Compliance: Fire-safe to API 607, anti-static, NACE MR0175 on request
Reduced bore vs full bore: A reduced bore (RB) ball valve has a bore smaller than the pipe internal diameter, so the valve is more compact and economical than a full bore valve, at the cost of a higher pressure drop. In this Class 900 Q47F series, the reduced bore sizes are shown as 3*2, 4*3, 6*4, 8*6, 10*8, 12*10, 14*12, 16*14, 18*16 and 20*18, where the first number is the valve size and the second number is the bore size. Reduced bore is commonly used where the pressure drop is acceptable and space or cost is a constraint; full bore is used where pigging or the lowest pressure drop is required.
Cast steel materials: ASTM A216 WCB is standard cast carbon steel for water, oil and gas service. A352 LCB / LCC is low-temperature cast steel for service down to about -46°C. A351 CF8 (304) and CF8M (316) are austenitic stainless steels for corrosive and cryogenic service; CF3 (304L) and CF3M (316L) are low-carbon versions for welded construction and intergranular corrosion resistance. The line temperature, pressure, medium and corrosion risk determine the correct body material.
Class 900 service: Class 900 is a high-pressure ASME class, commonly used on wellhead, pipeline and high-pressure process service. The pressure-temperature rating is to ASME B16.34. For sour service, NACE MR0175 compliance is available on request, and the anti-sulphur series uses A193 B7M / A194 2HM bolting and a suitable body material. For lower pressure classes or full bore, see the Q47F full bore series page.
1. Distinctive Seating Structure
According to the pressure level, medium properties and sealing requirements, trunnion ball valves may be made with a front seal structure, back seal structure, or front-back dual seal structure.
2. Self-Relieving Structure
In case of abnormal pressure rise in the middle cavity, a ball valve with a single seal structure is provided with a self-relieving function, while a ball valve with a dual seal structure uses the auxiliary pressure relief device on the valve body to carry out pressure relief.
3. First Aid of Seal
The valve is designed with an auxiliary seating emergency seal system. If the soft seat is damaged, or seal failure occurs in an emergency, emergency sealing may be effected by injecting sealant through the auxiliary sealing system. If needed, the emergency seal assembly can be used to rinse and lubricate the seating area. The valve stem can also be designed with an auxiliary emergency sealing system.
4. Fire Protection Structure
If requested by the working conditions and the user, the ball valve may be designed to be fireproof. The fireproofing design is to API 607 and JB/T 6899. If the soft seat ring is burnt in a fire, the fire protection structure prevents mass leakage and avoids fire spreading.
5. Anti-Static Structure
When operating the valve, friction between the ball and seat produces electrostatic charge that can accumulate on the ball. To prevent static spark, an anti-static device is placed on the valve to divert the electric charge accumulated on the ball.
6. Locking Device
To prevent misoperation and unexpected opening or closing caused by vibration, a locking device is designed at the fully open and closed positions of the hand-operated ball valve. This design is proven effective on petroleum and chemical production lines with inflammable media, or when valves are mounted outdoors.
Swipe horizontally to see all materials
| No. | Part Name | Carbon Steel Series | Stainless Steel Series | Low-Temperature Series | Sour Service (Anti-Sulphur) | ||
|---|---|---|---|---|---|---|---|
| 1 | Ball | ASTM A105 + hard chrome / ENP | F304 / F316 | F304 / F316 | ASTM A105 + hard chrome / ENP | F316 | |
| 2 | Bush bearing | Metal + PTFE, braided graphite fibre | |||||
| 3 | Sealing ring | PTFE / RPTFE / NYLON / MOLON / DELRIN / PEEK | |||||
| 4 | Seat | ASTM A105 + hard chrome / ENP | ASTM A182 F304 / F316 | ASTM A182 F6a | ASTM A105 + hard chrome / ENP | ASTM A182 F316 | |
| 5 | O-ring | Viton | |||||
| 6 | Fire-safe gasket | Flexible graphite + SS | |||||
| 7 | Supporting ring | ASTM A105 + hard chrome / ENP | ASTM A182 F304 / F316 | ASTM A182 F6a | ASTM A105 + hard chrome / ENP | ASTM A182 F316 | |
| 8 | Spring | Inconel X-750 | |||||
| 9 | O-ring | Viton | |||||
| 10 | Sealant injection valve | Same material as body | |||||
| 11 | Gasket | Flexible graphite + SS | |||||
| 12 | Bonnet | ASTM A216 WCB | ASTM A351 CF8 / CF8M / CF3 / CF3M | ASTM A352 LCB / LCC | ASTM A216 WCB | ASTM A351 CF8M | |
| 13 | Stud | ASTM A193 B7 | ASTM A193 B8 / B8M | ASTM A320 L7 | ASTM A193 B7M | ASTM A193 B7M | |
| 14 | Nut | ASTM A194 2H | ASTM A194 8M | ASTM A194 4 | ASTM A194 2HM | ASTM A194 2HM | |
| 15 | Nipple | ASTM A193 B7 | ASTM A193 B8 / B8M | ASTM A320 L7 | ASTM A193 B7M | ASTM A193 B7M | |
| 16 | Plug | ASTM A105 + hard chrome / ENP | ASTM A182 F304 / F316 | ASTM A182 F6a | ASTM A105 + hard chrome / ENP | ASTM A182 F316 | |
| 17 | Gasket | RPTFE | |||||
| 18 | Nipple | ASTM A193 B7 | ASTM A193 B8 / B8M | ASTM A320 L7 | ASTM A193 B7M | ASTM A193 B7M | |
| 19 | Ball | ASTM A182 F304 | |||||
| 20 | Bottom cover | ASTM A105 + hard chrome / ENP | ASTM A182 F304 / F316 | ASTM A182 F6a | ASTM A105 + hard chrome / ENP | ASTM A182 F316 | |
| 21 | Gasket | Flexible graphite + SS | |||||
| 22 | O-ring | Viton | |||||
| 23 | Sealant injection valve | Same material as body | |||||
| 24 | Body | ASTM A216 WCB | ASTM A351 CF8 / CF8M / CF3 / CF3M | ASTM A352 LCB / LCC | ASTM A216 WCB | ASTM A351 CF8M | |
| 25 | Bush bearing | Metal + PTFE, braided graphite fibre | |||||
| 26 | Drainage valve | Same material as body | |||||
| 27 | Spring | ASTM A182 F304 | |||||
| 28 | Key | GB/T 699 45 | |||||
| 29 | Stem | ASTM A182 F6a | ASTM A182 F304 / F316 | ASTM A182 F6a | ASTM A182 F304 | ASTM A182 F304 | |
| 30 | Thrust bearing | Metal + PTFE, braided graphite fibre | |||||
| 31 | O-ring | Viton | |||||
| 32 | Gasket | Flexible graphite + SS | |||||
| 33 | Back seat | ASTM A105 + hard chrome / ENP | ASTM A182 F304 / F316 | ASTM A182 F6a | ASTM A105 + hard chrome / ENP | ASTM A182 F316 | |
| 34 | Nipple | ASTM A193 B7 | ASTM A193 B8 / B8M | ASTM A320 L7 | ASTM A193 B7M | ASTM A193 B7M | |
| 35 | Packing | Flexible graphite / PTFE | |||||
| 36 | Packing gland | ASTM A182 F6 | ASTM A182 F304 / F316 | ASTM A182 F304 | ASTM A182 F6 | ASTM A182 F316 | |
| 37 | Gland flange | ASTM A216 WCB | ASTM A351 CF8 / CF8M | ASTM A351 CF8 | ASTM A216 WCB | ASTM A351 CF8M | |
| 38 | Bolt | ASTM A193 B7 | ASTM A193 B8 / B8M | ASTM A320 L7 | ASTM A193 B7M | ASTM A193 B7M | |
| 39 | Bolt | ASTM A193 B7 | ASTM A193 B8 / B8M | ASTM A320 L7 | ASTM A320 L7 | ASTM A193 B7M | |
| 40 | Yoke | ASTM A216 WCB | ASTM A351 CF8 | ASTM A352 LCB | ASTM A216 WCB | ASTM A351 CF8 | |
| 41 | Bolt | ASTM A193 B7 | ASTM A193 B8 / B8M | ASTM A320 L7 | ASTM A193 B7M | ASTM A193 B7M | |
| 42 | Operation type | Worm gear, electric operation, pneumatic operation | |||||
Swipe horizontally to see all dimensions
| Size (valve * bore) | DN | L | B1 | B2 | D | G | f | K | Z-Φd | c | Groove | A | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DN | RF | RTJ | BW | B1 | B2 | D | G | f | K | Z-Φd | c | Y | P | E | F | A | |
| 3*2 | 80*50 | 381 | 384 | 381 | 49 | 74 | 216 | 91.9 | 6.4 | 165.1 | 8-25.4 | 38.1 | 124 | 95.25 | 7.92 | 11.91 | 91 |
| 4*3 | 100*80 | 457 | 460 | 457 | 74 | 100 | 241 | 127 | 6.4 | 190.5 | 8-25.4 | 38.1 | 156 | 123.82 | 7.92 | 11.91 | 117 |
| 6*4 | 150*100 | 610 | 613 | 610 | 100 | 150 | 292 | 157.2 | 6.4 | 235 | 8-31.8 | 44.5 | 181 | 149.22 | 7.92 | 11.91 | 172 |
| 8*6 | 200*150 | 737 | 740 | 737 | 150 | 201 | 381 | 215.9 | 6.4 | 317.5 | 12-31.8 | 55.6 | 241 | 211.12 | 7.92 | 11.91 | 223 |
| 10*8 | 250*200 | 838 | 841 | 838 | 201 | 252 | 470 | 269.7 | 6.4 | 393.7 | 12-38.1 | 63.5 | 308 | 269.88 | 7.92 | 11.91 | 278 |
| 12*10 | 300*250 | 965 | 968 | 965 | 252 | 303 | 546 | 323.9 | 6.4 | 469.9 | 16-38.1 | 69.9 | 362 | 323.85 | 7.92 | 11.91 | 329 |
| 14*12 | 350*300 | 1029 | 1038 | 1029 | 303 | 322 | 610 | 381 | 6.4 | 533.4 | 20-38.1 | 79.2 | 419 | 381 | 7.92 | 11.91 | 362 |
| 16*14 | 400*350 | 1130 | 1140 | 1130 | 322 | 373 | 641 | 412.8 | 6.4 | 558.8 | 20-41.3 | 85.9 | 467 | 419.1 | 11.13 | 16.66 | 413 |
| 18*16 | 450*400 | 1219 | 1232 | 1219 | 373 | 423 | 705 | 469.9 | 6.4 | 616 | 20-44.5 | 88.9 | 524 | 469.9 | 11.13 | 16.66 | 464 |
| 20*18 | 500*450 | 1321 | 1334 | 1321 | 423 | 471 | 787 | 533.4 | 6.4 | 685.8 | 20-50.8 | 101.6 | 594 | 533.4 | 12.7 | 19.84 | 516 |
mm. Class 900 reduced bore shown; sizes are valve size * bore size (e.g. 3*2 = 3" valve with 2" bore). Full bore and other classes on request.
What is reduced bore (RB) on this Q47F Class 900 trunnion ball valve?
A reduced bore (RB) ball valve has a bore smaller than the pipe internal diameter, so the valve is more compact and economical than a full bore valve, at the cost of a higher pressure drop. In this Class 900 Q47F series, the reduced bore sizes are shown as 3*2, 4*3, 6*4, 8*6, 10*8, 12*10, 14*12, 16*14, 18*16 and 20*18, where the first number is the valve size and the second number is the bore size. Reduced bore is commonly used where the pressure drop is acceptable and space or cost is a constraint; full bore is used where pigging or the lowest pressure drop is required.
What pressure class and sizes are available in this Q47F Class 900 reduced bore ball valve?
This Q47F cast steel trunnion soft-seated ball valve is the Class 900 reduced bore version, covering 2" to 20" as 3*2, 4*3, 6*4, 8*6, 10*8, 12*10, 14*12, 16*14, 18*16 and 20*18. Body materials include ASTM A216 WCB carbon steel, A352 LCB/LCC low-temperature steel, and A351 CF8 / CF8M / CF3 / CF3M stainless steel. Soft seat materials include PTFE, RPTFE, NYLON, MOLON, DELRIN and PEEK; trim options are 13Cr, 304SS, 316SS and duplex stainless steel. For full bore or other pressure classes, see the Q47F full bore series page.
What is the difference between this Class 900 reduced bore valve and the Class 150–900 Q47F series?
This page is the Class 900 reduced bore version, with sizes from 2" to 20" shown as 3*2 to 20*18. The Q47F series page covers Class 150, 300, 600 and 900, and includes both full bore and reduced bore options up to 36". The body and trim materials, fire-safe design, anti-static structure and seat options are the same; the difference is the pressure class coverage, the bore type and the size range. If you need full bore, Class 150/300/600, or sizes above 20", refer to the Q47F series page.
Is this Q47F Class 900 reduced bore ball valve fire-safe and anti-static?
Yes. The valve is designed with a fire-safe structure to API 607: if the soft seat ring is burnt in a fire, the fire-safe gasket and metal-to-metal backup prevent mass leakage and limit fire spreading. An anti-static device is fitted to divert the electrostatic charge generated by ball-to-seat friction, so static sparks are avoided. A locking device is provided at the fully open and closed positions of the hand-operated valve to prevent misoperation. NACE MR0175 sour-service compliance is available on request.
Contact Person: Mr. Biff Teng
Tel: 86-18066318081